 |
 |
||||
|
|||||
 |
 |
|
|
||||||||||||||||||||
| Both the Tygon R-3400 and the Tygon PP-340 are made from the same compound of Tygon R-3400. They differ only by their process of production and the sizes available. |
|||||||||||||||||||||
Special
Plasticized Vinyl Gasketing Sheet and Roll Stock
for use in:
Chlorine
Dioxide
Sodium
Hydroxide, Brine, Hypo and difficult to handle Acids.
EXTRUDED "PANACEA"® BRAND TYGON R-3400 AND PRESS MADE TYGON PP-340 gasket sheets, are specially compounded plasticized vinyl materials developed for use on a wide range of chemicals in the bleach operation of a Pulp Mill. These materials are available in Extruded and Press Made Sheet, Cross Section Extrusions, Tubing and Cord Stock. All sheet goods can be die cut and spliced to meet all gasketing requirements and can easily be fabricated into linings, custom shapes and linings, custom shapes and parts. Tygon R-3400 is also available in Tubing in a large range of sizes. Please note our "Panacea"®, formulation PP-363 is plasticized vinyl sheeting and available for Hydrogen Peroxide applications.
| Physical Properties |
|
|
Hardness, Shore A, (15 seconds depression, 75 deg. F) |
|
|
Tensile Strength, psi (Room Temp.) |
|
|
Ultimate Elongation, % |
|
|
Tensile Stress at 100% Elongation, psi |
|
|
Tensile Set, % |
|
|
Tear Resistance, Lb. F/in. |
|
|
Compression Set |
|
|
Constant Load, "A", % |
|
|
47.5 Constant Deflection, "B", % |
|
|
Abrasion Resistance, mg lost/1000 cycles |
|
|
Specific Gravity |
|
|
Water Absorption, % |
|
|
Brittle Point, deg. F |
|
|
Flame Resistance* |
|
|
Horizontal Plane ABR |
|
|
Vertical Plant ATB |
|
|
AEB |
|
|
Heat Resistance, deg. F |
|
|
*ABR
- Average Burning Rate |
|
|
|
|
|||
|
||||
|
|
|
